Welcome, Guest. Please login or register.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - gderf

Pages: [1] 2 3
2
Hardware / Re: ALIX boards, max throughput?
« on: March 01, 2016, 02:48:55 PM »
APU case temp is warm, but not hot. The heat sink pads are in contact with the case bottom. CPU temp here is reported to be 133 degrees F.

3
Hardware / Re: ALIX boards, max throughput?
« on: February 21, 2016, 08:59:35 PM »
Best I have seen on my old ALIX2C3 was about 90mbps.


I never bothered to try to tune it to do better as once my ISP upgraded my service it was well beyond what 100mbps ethernet ports are capable of regardless of the hardware or OS anyway.


I went with an APU1D4 which has gigabit ports.

4
Firewall/NAT / Re: NAT/Port forwarding totally broken?
« on: February 21, 2016, 08:53:31 PM »
You'd have to be a lot more specific about your use case.


I have quite a few port forwards with corresponding rules and they all work.


If this was a generic bug in t1n1wall, it would have been heavily reported by now.


There are other possible explanations, none of which would involve the firewall, but guesswork is not something that is encouraged here.


5
Security / Re: Security update r68
« on: November 02, 2015, 02:58:55 PM »
No problem, take your time, and thanks!

6
Security / Re: Security update r68
« on: November 02, 2015, 02:22:42 PM »
Are amd64 builds discontinued?

7
Services / Re: PC Engines APU1D4 and SNMP
« on: August 14, 2015, 11:52:02 PM »
1.8.2b44 has the capabilities I was asking for.


Thanks Andy!

8
Feature Requests / Re: SNMP Agent Upgrade to 64bit
« on: August 14, 2015, 10:28:19 PM »
Thanks to Andy, this has been incorporated into 1.8.2b44.


9
Services / Re: PC Engines APU1D4 and SNMP
« on: August 14, 2015, 02:26:11 AM »
I just grabbed the image and will upgrade my build 42 with it. Thanks. I'll report back soon.

10
Services / Re: PC Engines APU1D4 and SNMP
« on: August 14, 2015, 02:12:23 AM »
I got the sourceforge.net email about "try net-snmp v5.7."


I am keeping an eye on the 1.8 snapshots folder for the next build and will test.


11
Services / Re: PC Engines APU1D4 and SNMP
« on: August 14, 2015, 12:49:03 AM »
Ouch. I was hoping this would be easier :(


Any idea what the pfsense guys did and can anything there be borrowed?

12
Services / Re: PC Engines APU1D4 and SNMP
« on: August 13, 2015, 08:40:40 PM »
I looked at a copy of ucd-snmp-4.2.7.1. The file of interest may be /mibs/IF-MIB.txt


The 64bit counters are mentioned there.


Maybe that file could be back-ported or does keeping track of 64bit numbers require running on a 64bit OS?

13
Services / Re: PC Engines APU1D4 and SNMP
« on: August 13, 2015, 02:40:47 PM »
Well, I wouldn't know either. Are there any MIBs included in the distribution somewhere? When one snmpwalks a device, what is actually being read?


What I can say is this. Taken from the iog program:



 my %oidnames = qw(ifInOctets      1.3.6.1.2.1.2.2.1.10
           ifOutOctets     1.3.6.1.2.1.2.2.1.16
                     ifHCInOctets    1.3.6.1.2.1.31.1.1.1.6
                     ifHCOutOctets   1.3.6.1.2.1.31.1.1.1.10);


This program file is dated 10/15/2003. So the use of the 64bit (HC) counters isn't a recent phenomenon.


Thanks for looking into this.

14
Services / Re: PC Engines APU1D4 and SNMP
« on: August 05, 2015, 02:26:22 PM »
Thanks for looking into this. I am 'evaluating' cough.... pfsense which has the 64 bit counters. It handled way too slow when I last looked at it on ALIX2C3, but is fine on APU1D4. But I would like to stick with t1n1wall as there is nothing else in pfsense I would need right now other than maybe the temperature sensor.

15
Installation / Re: iso image file to bootable usb stick
« on: August 05, 2015, 02:22:03 PM »
Thanks, and welcome back.

Pages: [1] 2 3