Messages

1

Installation / Re: Very slow webGUI

« on: December 10, 2015, 07:23:52 AM »

so, this depends on your model network card, and is a bug in ipfilter/freebsd

from /exec.php disable TSO

ifconfig em0 -tso

or

ifconfig em0 -tso4

where em0 is the network card from the console or interfaces page

I'll have to dig this bug, but at least I know why it doesn't affect me , as my NIC is ok.

Andy, imho, it will be useful to add such setting in to webGUI. See screenshot in attach.

Thank you!

Best Regards,
Oleg.

2

Installation / Re: Very slow webGUI

« on: December 10, 2015, 02:56:07 AM »

Below is my entire setup. I'm using 4gb of memory and an 8gb USB 2.0 flash drive for the t1n1wall image.

Computer

Memory

USB flash drive

Interesting hardware theory. Why would access to the internet work fine but not access to the webgui? From my bug report you can see that I changed a firewall rule in the source code and it fixed the issue for me. Obviously not the best solution. One setting I changed from the start is my lan and wan interface settings. From the serial console I reverse my lan and wan settings from the default settings t1n1wall provides. So t1n1wall sets my lan to em0 and my wan to em1. I reverse those 2. Those are the only settings I change when I tested t1n1wall. I'm going to have to test out other hardware now.

Oleg can you provide more information reference your hardware setup as well?

Yes, of course: Supermicro A1SAM-2550F motherboard,  DDR3 DIMM 4Gb PC12800 1600MHz Kingston ECC CL11 - 2 (8Gb total), SSD Intel 160Gb S3500 2.5" SATA3, SuperMicro CSE-813MTQ-350CB.

Than you!

3

Installation / Re: Very slow webGUI

« on: December 09, 2015, 12:57:29 PM »

Thank you for your answer!

Fresh install, yes.

All pages are very-very slow. Some of them (System: General setup) is half-opening - i cannot open full page.

Best Regards,
Oleg.

4

Installation / Very slow webGUI

« on: December 09, 2015, 11:58:02 AM »

Hello!

Can you help me?

Using generic-pc-1.10.2b69.amd64.iso image on Supermicro A1SAM-2550F motherboard, web gui is incredibly slow. How i can fix it?

Best Regards,
Oleg.