SD Card boot on APU2 results in "Configuration device not found" error.

[tuaris]

This is with the 2.11.1b165 image for AMD64.  I've tried it with different SD cards, both were new.  It looks like this problem: https://sourceforge.net/p/t1n1wall/bugs/13/

Code: [Select]

cpu_reset: Stopping other CPUs
PCEngines apu2
coreboot build 20160307
-2064 MB DRAM

SeaBIOS (version ?-20160307_153453-michael-desktop64)
Found mainboard PC Engines PCEngines apu2
multiboot: eax=0, ebx=0
boot order:
1: /[email protected]/[email protected]/usb-*@1
2: /[email protected]/[email protected]/usb-*@2
3: /[email protected]/[email protected]/usb-*@3
4: /[email protected]/[email protected]/usb-*@4
5: /[email protected]/*@14,7
6: /[email protected]/*@11/[email protected]/[email protected]
7: /[email protected]/*@11/[email protected]/[email protected]
8: /[email protected]/pxe.rom
9: pxen0
10: scon1
11:
Found 19 PCI devices (max PCI bus is 02)
Copying SMBIOS entry point from 0x77fb7000 to 0x000f3110
Copying ACPI RSDP from 0x77fb8000 to 0x000f30e0
Copying MPTABLE from 0x77fdc000/77fdc010 to 0x000f2f30
Copying PIR from 0x77fdd000 to 0x000f2f00
Using pmtimer, ioport 0x818
Scan for VGA option rom
Running option rom at c000:0003

Google, Inc.
Serial Graphics Adapter 08/22/15
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ ([email protected]) Sat Aug 22 09:25:30 UTC 2015
Term: 80x24
IO4 0
Turning on vga text mode console
SeaBIOS (version ?-20160307_153453-michael-desktop64)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte contexts
XHCI    extcap 0x1 @ feb22500
XHCI    protocol USB  3.00, 2 ports (offset 1), def 0
XHCI    protocol USB  2.00, 2 ports (offset 3), def 10
XHCI    extcap 0xa @ feb22540
Found 2 serial ports
ATA controller 1 at 3010/3020/0 (irq 0 dev 88)
EHCI init on dev 00:13.0 (regs=0xfeb25420)
ATA controller 2 at 3018/3024/0 (irq 0 dev 88)
Searching bootorder for: /[email protected]/*@14,7
Searching bootorder for: /[email protected]/memtest
Searching bootorder for: /[email protected]/setup
Found sdcard at 0xfeb25500: SD card SL08G 7580MiB
XHCI no devices found
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms
PCengines Press F10 key now for boot menu:
Select boot device:

1. SD card SL08G 7580MiB
2. Payload [memtest]
3. Payload [setup]

Searching bootorder for: HALT
drive 0x000f2e90: PCHS=0/0/0 translation=lba LCHS=966/255/63 s=15523840
Space available for UMB: c1000-ef000, f0000-f2e90
Returned 262144 bytes of ZoneHigh
e820 map has 6 items:
  0: 0000000000000000 - 000000000009f800 = 1 RAM
  1: 000000000009f800 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 0000000077fae000 = 1 RAM
  4: 0000000077fae000 - 0000000078000000 = 2 RESERVED
  5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00
/kernel text=0xb779a8 data=0xe6090+0x310568 -
/mfsroot size=0x1c12000
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p11 #349641: Tue Jul 16 22:56:32 IST 2019

-snip-

Code: [Select]

md0: Preloaded image </mfsroot> 29433856 bytes at 0xffffffff8136dfa0
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <AMD EHCI root HUB> at usbus0
uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
g_access(944): provider md0a has error 6 set
g_access(944): provider md0a has error 6 set
g_access(944): provider md0a has error 6 set
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x0438 product 0x7900> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus0
uhub1: 4 ports with 4 removable, self powered
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 998149877 Hz quality 1000
Trying to mount root from ufs:/dev/md0 []...
random: unblocking device.
kern.coredump: 1 -> 0
net.enc.in.ipsec_filter_mask: 1 -> 2
Configuration device not found; trying again in 5 seconds (2 attempt(s) left)...
Configuration device not found; trying again in 5 seconds (1 attempt(s) left)...


****************************Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Wai
Syncing disksting (max 60 se, vnodes remainconds) for system process `syncer' toing... 0  stop... 0 done
All buffers synced.
Uptime: 34s
uhub1: detached

The operating system has halted.
Please press any key to reboot.


[andywhite]

Hi,

Can you post the full boot log ?

looking back at that bug, I think it couldn't find the SD device either due to not waiting long enough or a kernel change.

I don't have easy access to an APU thats not in use. you should see the SD device and controller during boot

Code: [Select]

umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.01/1.00, addr 2> on usbus6
da0: <Multiple Card  Reader 1.00> Removable Direct Access SCSI-4 device

[andywhite]

newer APU's , APU2/APU3 , use a different hardware interface to the sd card.

r167 has this driver, can you test, hopefully it just works